How To Sew Jersey Fabric, Step-By-Step
Sewing your own clothes is a cost-effective way to stay fashionable. In this article, we’ll share how to sew jersey fabric and what you can do with it once you’ve sewn the fabric. Here are the steps to sew jersey fabric.
1. Prepare your work area by prepping the fabric with a fusible web that won’t shrink too much in length (depending on the type of fabric you’re sewing, this may not be needed). Be sure there’s enough padding under the work surface so that it doesn’t scratch when you move around. Next, gather the pieces of jersey fabric together and cut out the pattern if necessary. Or, just buy a pattern online or purchase pre-made garments from a sewing store.
2. Place your pattern piece on top of some fusible material and trace it onto your jersey fabric using normal markers or chalk pen or chalk. If you do use chalk, make sure to use a chalk that is washable so the line doesn’t smear.
3. Cut out your pattern piece using some sharp scissors or a rotary cutter and mat. If you use a rotary cutter, it’s best to start at the very edge of your material since the blade scrapes through thick fabrics easily. I would recommend getting one with a guide to help keep you straight as you cut.
4. Next, lay your fusible fabric over the jersey fabric and fold both pieces together along the original lines.
5. Press in place with an iron on low heat setting (this should fuse the fabric together).
6. Place your jersey fabric into your sewing machine and attach zipper if necessary (I used an invisible zipper for my project).
What to Consider When Sewing Jersey Fabric
Sewing with jersey fabric can be a bit tricky, but if you keep a few things in mind, you’ll be able to sew it like a pro! Here are a few things to consider when sewing jersey fabric:
– Use a stretch stitch or serger. This will help the garment keep its shape and prevent it from stretching out.
– Use a walking foot. This will help prevent the fabric from stretching as you sew.
– Choose the right needle. A ballpoint needle is best for sewing jersey fabric, as it won’t pierce the fabric and cause it to stretch.
– Be careful not to overheat the fabric. Jersey fabric is delicate and can be easily damaged by heat. If you’re using an iron, use a low setting and press quickly. If you’re using a sewing machine, be sure to use the topstitch function (if your machine has this option) and don’t stitch over the same area more than once.
– Use pins or a safety pin to carefully pin your seams together. You can also iron in place instead of pinning, but be sure not to overdo it!- If you have any problems with your garment, consult a professional tailor. Your local dry cleaner might also help.If this article was helpful please share it with your friends and family!
Step 1: Sew the Jersey selvage to the raw edge
Sewing with jersey fabric can be a bit tricky, but once you get the hang of it, it’s really not that difficult. Here are some tips on how to sew jersey fabric, step-by-step.
1. Start by sewing the jersey selvage to the raw edge. To do this, simply line up the two edges and sew them together with a straight stitch.
2. Next, you’ll need to serge the raw edge of the fabric. This will help to prevent the fabric from fraying.
3. Once you’ve serged the raw edge, you can now sew your seam as normal. When sewing jersey fabric, it’s best to use a stretch stitch or a zigzag stitch.
4. Finally, press your seam open with an iron and you’re all done! Sewing with jersey fabric is really not that difficult once you know how. Just take your time and be careful not to stretch the fabric too much when sewing.
Find out how to make slipcovers for your couch using jersey fabric here. If you sew with jersey fabric, be sure to post a photo of your finished project in the comments below!
Step 2: Sew the right sides of the fabric together, leaving 6 inches open at the top
If you’re looking to sew jersey fabric, there are a few things you’ll need to keep in mind. First, you’ll need to choose the right needle. A ballpoint needle is ideal for sewing jersey fabric, as it won’t damage the fabric.
Next, you’ll need to set your sewing machine to a stretch stitch. This will help the stitches stretch with the fabric, preventing them from breaking.
When you’re ready to start sewing, place the right sides of the fabric together and pin them in place. Then, sew the fabric together using a stretch stitch, leave a few inches open at the top.
Once you’ve sewn the fabric together, finish the raw edges with a serger or zigzag stitch. Then, turn the fabric right side out and press it. Finally, topstitch around the entire piece of fabric to secure the seams.
Step 3: Turn fabric inside out and press
If you’re working with jersey fabric, there are a few things you need to keep in mind. First, you should always turn the fabric inside out before sewing.
Next, you should press the fabric before sewing. This will help to set the stitches and give your finished garment a professional look.
Finally, when sewing jersey fabric, use a stretch stitch or a zigzag stitch.
Now that you know these tips, let’s get started! Follow the steps below to sew a simple jersey shirt.
1. Cut out your pattern pieces. Make sure to cut them out on the reverse side of the fabric so that they’re mirror images of each other.
2. Pin the pattern pieces together at the shoulder seams and side seams.
3. Sew the shoulder seams and side seams using a stretch stitch or a zigzag stitch. Be sure to backstitch at the beginning and end of each seam.
4. Finish the raw edges of the garment with a serger or an overlock stitch.
5. Try on your garment and adjust any fit issues. Next, mark your seam allowances with a fabric pen.
6. Take the top pattern piece and pin it to the lower pattern piece along the seam lines that you just marked with your fabric pen.
7. Pin these two pieces together around all four sides of the garment, leaving one side open for turning inside out later on.
8. Sew around all four sides using a stretch stitch or zigzag stitch, leaving one side open for turning inside out later on.
9. Cut along your stitching line and turn inside out, lining up the seams as needed before sewing them shut with a stretch stitch or zigzag stitch again.
10. Repeat step 6 until you have sewn all seams in the garment together from top to bottom and left to right.
11. Finish off by sewing the final two seams closed with a stretch stitch or zigzag stitch, and then topstitch around the entire thing using a 1/4″ seam allowance.
12. Cut out your pettiskirt pattern piece from the fabric included with your kit, and trace it onto some fusible webbing for attaching to the back of this custom-made pettiskirth!
13. Cut it out, iron it to the smaller piece of non-fusible webbing and put both pieces through your printer on setting as thin as possible (this will create a nice crisp edge).
14. Peel off whatever glue is on the back of your pattern piece before you stick it to that new piece of non-fusible webbing.15. Once you’ve attached the back of the pettiskirt to the fusible side, iron it on and sew roughly around the edges using a 1/4″ seam allowance.
16. Cut out your pattern piece from your fabric for the front of this custom-made pettiskirth!
17. Trace that pattern piece onto another piece of non-fusible webbing, remove any backing from it and stick it on your work surface as face up, like you would with a paper doll pattern.
18. Using a pencil, trace around the face of your pettischool girl pattern onto that new piece of non-fusible webbing in such a way that neither side of the pattern overlaps any other side.
19. Cut out your pettiskirth front from non-fusible webbing along your traced line.
20. Using scissors, cut out a little bit of the back of this piece from the front so that you have some room for it to move as you sew around it (not all the way through though, leave about 1/4″ showing on either side).
21. Using a pencil, mark points A and B on opposite sides of the pettiskirth front piece just like you would with a paper doll pattern (see picture above).
22. Position your fusible webbing backing side down over point A, and then position your non-fusible webbing face.
Step 4: Sew seams on wrong side of fabric
First, start by sewing the seams on the wrong side of the fabric.
Next, use a zigzag stitch to sew around the edges of the fabric. This will help to keep the fabric from fraying.
Finally, finish by serging the edges of the fabric. This will give your garment a professional-looking finish.
Step 5: Press the seams of your garment.This is a very important step, which I don’t see enough people pay attention to. A good presser will be able to iron out any unevenness and make sure that the stitches are perfectly matched up on the right sides of the fabric.
As I mentioned above, hand stitching is more difficult than machine sewing, so it’s best to use a quality serger like a Kenmore Progressive 325 or Singer 99K-10 if you have one.
Step 6: Hem your garment using a rust-proof hem tape or stitch in place.If you’re working with denim fabric, you’ll want to hem some of them before putting them on display in your closet. This will ensure that they last long enough for you to wear them several times.
Step 7: Treat your garment, whether it’s made of denim or a different material, with a natural-colored fabric protector that makes the fabric look slightly faded and worn. You can use this step to make your shirts look used or vintage. This will also add to the cool factor.I hope that these directions helped you in making a great DIY denim shirt!
Step 5: Hem sleeves by folding them in half lengthwise, matching raw edges.
If you’re looking to sew jersey fabric, there are a few things you need to know. Jersey fabric is a type of knit fabric that is stretchy and comfortable. It’s often used for making clothing like t-shirts and leggings.
Sewing jersey fabric can be a little tricky because it’s so stretchy. But with a few tips, you’ll be able to sew it like a pro! Here’s what you need to know:
1. Choose the right needle. When sewing jersey fabric, you’ll want to use a stretch needle. This type of needle has a slightly rounded tip that helps prevent the fabric from being damaged as it’s fed through the machine.
2. Use a walking foot. A walking foot is a type of presser foot that helps feed the fabric evenly through the machine. This is especially important when sewing jersey fabric because it can tend to stretch out as it’s fed through the machine.
3. Use a serger. A serger is a type of sewing machine that sews an overlock stitch. This type of stitch is important when sewing stretchy fabrics like jersey because it helps to keep the seams from stretching out over time.
Fold sharp edges 1/2 inch towards body while forming a loop with one long stitch.
In this guide, we will show you how to sew Jersey fabric using a fold sharp edges / inch towards body while forming a loop with one long stitch method. Jersey is a very versatile fabric that can be used for a variety of garments, such as tanks, tees, and even dresses.
First, start by folding the fabric in half so that the long edge is facing out. Make sure that the fold is sharp and straight. Next, stitch the folded edge together using a loop stitch. Make sure that the needle goes through both layers of fabric at the same time. Finally, pull the stitches tight to form a loop.
One of the difficult things about sewing patterns with a jersey fabric is that there is no guide to follow due to the fact that the stitch count can vary. This makes it difficult to understand where exactly the stitching goes on, especially when you are trying to sew a zipper.
In this particular tutorial, we will show you an easier way to do this by using a loop stitch. The concept here is simple – by forming a loop, any sharp edges of the Jersey fabric will be tucked away, and if you are careful enough and follow along with each step carefully all the while looking at your work from time to time, you should be able to sew patterns without any problems. As always, when sewing you should always pay attention at all times so that none of your stitches get too tight or loose.
This tutorial is for a continuous loop stitch that can be used to sew any type of fabric, including ultra-thin jersey fabric, but if you are interested in sewing on stretch denim or other types of jeans fabric instead, then check out our tutorial on the best method to attach a zipper to stretch denim jeans.
This particular tutorial will show you how to sew a loop stitch on a basic black and white striped shirt. The example shown uses only 2 colors, so if you want the process to be easier make sure you have at least 3 colors – just double or triple up thread colors when doing this kind of work.
Step 1: Threading the Sewing Machine with Thread Pins and a Bobbin. You can use any sewing machine, but we recommend using a serger if you do this project. It will save you time and aggravation!
Step 2: Ironing the Shirt Before Beginning. Because this technique uses more than one thread, it is best to iron each section first before adding the next color of thread (shown here with light blue thread). This gives the stitches stayed flat and smooth after all of the lines are added in. You can skip this step if you prefer – we didn’t suggest it for beginners because it could make that work later look sloppy and uneven.
Step 3: Sewing Stitches on Light Blue Stripes (First Section) Using Light Blue Thread. Start by stitching your first line of 1 /2 inch stitches (1/2 inch equals 2.5cm). Stitch the line vertically down the shirt, and on both sides of the light blue horizontal stripes. This will make a nice, solid line which you can use to get all of your other lines in order.
Step 4: Sewing Stitches on Light Blue Stripes (Second Section) Using Light Blue Thread. Repeat step 3 using a different color of thread to stitch this section, but leave it like the first section – 1/2 inch and straight down. This part is important! You will be following along with Step 5 and 6 for this next part. This part is just another way of showing you how to get every single line straight and uniform.
Place stitches near hem
When sewing jersey fabric, place your stitches near the hem. This will help keep the fabric from stretching too much while you’re wearing it. Sew hem on both sleeves and bottom. When you sew your seams, leave a small opening for turning. This will allow you to turn the fabric without creating any puckers or puckers that might cause the garment to stretch out of shape.
Turn zippers inside out when sewing them in place. You can do this by pinning in those areas where you think a zipper would show, then topstitching along the line of pins, or by using a zipper foot and sewing them with the teeth facing up so that they don’t catch. Machine-wash the jacket. Most new jackets are now made of a synthetic or cotton fabric that is machine washable. You can wash your jacket by itself or with other clothing, but keep in mind that you should always line dry it to preserve the color and shape of the garment.
Keep the jacket away from dried-on deodorant or other odors. If you don’t have access to a dryer, consider leaving it outerwear on a clothesline overnight until it is completely dry.Air out your jacket before wearing it again.
Use an open-air moving fan or a hair dryer with a diffuser attachment to blow air through the garment for about 20 minutes to two hours. Roll up your sleeves and go outside or into another room for this process so that the air doesn’t circulate around other people’s clothes.
Before you put your jacket back on, hold your arms up in front of the fan (or hair dryer) and slowly lower them to get the full effect of drawing out any residual odor from pers piration and the fabric.
Sewing jersey fabric can be a fun and rewarding experience, but it can also be frustrating if you don’t know the steps involved. In this tutorial, we will walk you through the basics of sewing jersey fabric so that you can start making your own clothes right away! We recommend reading through the entire tutorial before starting so that you have a better understanding of what is happening and why. Have fun learning how to sew jersey fabric!