dark

How To Sew A Tote Bag With Lining

How To Sew A Tote Bag With Lining

How To Sew A Tote Bag With Lining

 

Sewing a tote bag with lining can be complicated, but it is an essential skill to have. Luckily, this article will walk you through the steps of sewing one from start to finish! My daughter is going to college in New York City, and I wanted something to put her souvenirs and things in. I picked up this sewing machine bag, but it was way out of my price range. So instead, I decided to make my own from a tutorial on Pinterest!

Supplies: Home Decorator’s fabric (I used a solid background with patterns on top)

Cotton batting for insulation

Sewing machine – This one isn’t necessary but makes it so much easier! It makes the process so much faster and cuts down on mistakes. Plus why go to all the trouble when you can just buy the stuff? 😉

Step 1: Using the measurements listed on the inside of the bag, cut your fabric and batting to fit.

Step 2: Use a serger to sew in ALL four corners/hems on the bottom of the bag (it’s better to have too much room than not enough).

Step 3: Sew around the top of the bag.

Step 4: Fold over and stitch down the top edges, then cut off excess.

Step 5: Turn it right side out and fill with stuffing! I had about a 6″ lid opening that I stuffed most of my stuff into (from inside).

Step 6: Sew up any remaining sides (I did one side from each side)

Step 7: Fill with more stuffing!

Step 8: Add lining material and you’re done! And now you can easily carry all of your stuff without the bulk of a purse!

Introduction

If you’re looking for a versatile and stylish tote bag that can be used for daily errands or as a weekend getaway bag, sewing one yourself is the perfect solution. With this sewing tutorial, you’ll learn how to sew a tote bag with lining using basic sewing techniques.

Material and Tools Needed:

-Lightweight fabric (such as cotton twill) for the body of the tote bag
-Heavy-duty thread (such as polyester thread) for the lining
-Seam ripper
-Scissors
-Tape measure
-Straight pins
-Pinsetter or awl
-Stitch marker
Corduroy fabric (for the straps)
-Basketweave fabric (for the hem)

1. Cut out the pieces of your fabric according to measurements listed in the Materials and Tools Needed section above. For the body of your tote bag, cut a 20″x13″ rectangle from lightweight fabric and a 18″x11″ rectangle from heavy-duty thread. For the lining , cut a 16″x11″ rectangle from heavy-duty thread. 2. Take a look at your pieces of fabric and decide how you want the edges to be finished. For the body of the bag, fold the lightweight fabric in half with right sides together, matching seams along all four edges, and stitch or stitch using sewing machine zigzag stitch on all sides enclosing all four edges with a single seam.

Apply any finishing touches you like to individual side seams using pins or decorative needles and/or snaps. Make sure that all raw edges are not visible before you sew them together. For the lining piece for your tote bag, lay the heavyweight thread flat on top of the heavyweight fabric with wrong sides facing up (right sides will be facing out) and sew the sides together using a zigzag stitch. For the lining piece for your tote bag, lay the lightweight thread flat on top of the heavyweight fabric with wrong sides facing up (right sides will be facing out) and sew the sides together using a zigzag stitch.
A NOTE ON SEWING: If you are new to sewing, I recommend that you first practice by following patterns in books before moving on to more complicated projects. There are many free sewing patterns available online, so you may wish to start with one that fits you well and from there move onto other projects such as your purse or backpack. You can also find lots of great patterns in my book Tote Bags : DIY Projects for Everyday Life , published by Stitch craft, available on Amazon.com.

As with all sewing projects, it is important to press your seams open after you have sewn the sides of your bag together. It’s also a good idea to leave a bit of a space between the two pieces of fabric before sewing the edges together. This space will allow for some give when you turn the bag right side out, which will avoid any puckers in the final product.When you’re done with these first steps, lay each piece of fabric out flat as shown in the above photo (right sides facing up).

What You’ll Need

In order to sew a tote bag with lining, you will need the following supplies: a tote bag, lining fabric, thread, a seam ripper, andissors. Before you begin sewing your tote bag, make sure that the lining fabric is big enough to fit inside the tote bag.

To sew a tote bag with lining, start by finding the center of the lining fabric and pin it to the corresponding spot on the tote bag. Then, stitch the lining fabric to the tote bag using a seam ripper and scissors.

Make sure that you leave a 1-inch gap between the lining fabric and the tote bag exterior. Repeat these steps for all of the sides of the tote bag. That a tote bag with lining requires more sewing than one that does not have a lining. If you are an experienced sewer, it is possible for you to finish the tote bag with lining by using only the supplies listed above. However, beginners should wait until they have acquired more sewing skills before attempting this project.

How to Make a Drawstring Tote Bag

A drawstring tote bag is ideal for keeping your belongings organized. Here’s how you can make one: First, find two contrasting pieces of fabric or two matching fabrics and cut them into four equal-sized pieces. Divide each piece into three equal squares and sew each square together on the long side using a running stitch around all four sides of the square and leaving a 4″ opening in the center. Repeat this process with the remaining two pieces of fabric. Then, turn one of the resulting squares inside out and press it flat to create a covering for the tote bag.

Finally, sew around all four edges of this square with a seam allowance of 1⁄4″. Next, cut ribbons into three equal lengths for each side of your bag. To do this, measure out 5″ of ribbon and pin one end tightly to both sides of your starting piece. Repeat these steps evenly on both sides until you have cut enough ribbon. Apply a heavy layer of glue along only one side edge at a time so that none gets underneath or through the stitching. Lastly, fold over the ends of each ribbon.

How to Sew A Tote Bag With Lining

If you’re looking for a unique and stylish tote bag, then sewing your own lining is the way to go! This tutorial will show you how to sew a lining for a tote bag using a woven fabric and a serger. You’ll be able to create a beautiful and functional tote bag in no time!

Step by step instructions

If you’re like most people, your tote bag collection is growing by the day. And while a good old-fashioned shopping bag will do in a pinch, wouldn’t it be great to have one that’s stylish and functional? With a few simple steps, you can sew your very own tote bag with lining. The end result will be a chic, personalized bag that you can use for all of your daily errands.

1. Start by cutting out the pieces for your tote bag. You’ll need a 16″ x 18″ piece of fabric for the body of the bag, and a 1″ seam allowance. You’ll also need two 19″ x 13″ pieces of fabric for the front and back of the bag, as well as a 1″ seam allowance.

2. Next, sew the two sides of the 18″ x 18″ piece of fabric together using a seam allowance of 1″. Press the seam open.

3. Turn the piece of fabric so that the unsewn side is facing outwards and press it again. Then, use a hot iron to press down on one end of the 18″ x 18″ piece of fabric so that it forms a nice pointy edge .

4. With right sides of the fabric facing outwards, pin the edge with the pointy end down to one side of your 18″ x 18″ piece of fabric. Then, machine stitch around all four sides using a 1″ seam allowance.

5. Next, fold that same side over so that it forms the outside edge of your bag’s bottom flap. Tip: Use a ruler to measure and mark off this point before sewing the side in place.

6. Repeat steps 2-5 on either side of your bag’s bottom flap to create two more 12″ – 13″ long bottoms for your bag (these will be used later).

7. Now, start by folding over one corner of your 16″ x 18″ piece of fabric. Then, crease the fold in half with your fingers to form a right angle. Repeat on both sides of the fabric and then pin this fold down to the side of your bag with the pointy end pointing towards the bottom of your bag’s flap.

8. Curl that same corner so it meets up with a point on the other side of your bag’s bottom flap. Fold that piece over, and pin it in place. Using a 1″ seam allowance, stitch around all four sides of both pieces straight across using about 3/4″ long stitches.

9. Now, repeat steps 5-8 on either side of each 12″ – 13″ piece forming two more 12″-13″ x 2-3/4″ x 1/2″ rectangles. Then, fold each of those pieces in half to form a 12″-13″ square. Fabric glue the ends together and you’re done!I’ve listed the size I used for my envelopes (I made 6) below along with measurements for three different bags I’ve made so far. I think these sizes work best for my needs and offer enough space for everything without making your bag look too large or small. The perfect size envelope would have been 13x13x1″. You can certainly go bigger than that though and I’d recommend at least 16×16″, 18×18″, or 20×20″. Whatever you choose, make sure it’s big enough to fit all of your important papers.

Tips for success

When it comes to sewing a tote bag, there are a few things to keep in mind that will help make the process easier and more successful.

1. Make sure your fabric is of good quality. A poorly made tote bag will not only look bad, but it may also not perform as well as one that is made from better materials.

2. Follow the stitching instructions carefully. Incorrect or rushed stitching can lead to holes in your fabric and poor overall results.

3. Sew the seams by hand, instead of using a machine. This will give you the best control over the finished product and eliminate any potential errors.

4. Allow time for your project to dry before using it. If your seams are incorrect or your fabric is not of good quality, moisture can damage them both.

What You’ll Need

You will need:
-Tote bag fabric
-1/2 inch seam allowance
-Needle and thread
-Iron

1. Measure the width of the fabric and write this down. This is how wide your fabric will be after it is cut.
For example, if you measure 4 inches, your fabric will be 4 inches wide.
2. Cut the fabric according to the measurement you took in step 1.
3. Make a 1/2 inch seam allowance along the long edge of the fabric.
4. Sew a seam along the long edge of the fabric using a needle and thread.
5. Turn the bag right side out and press it with a hot iron.

Instructions

If you have ever wanted to sew a tote bag, but had no idea where to start, this tutorial is for you! In this article, we will show you step by step how to sew a lining for a tote bag. This is a great way to make your tote bag extra special and personalized. You will learn how to:

-Measure the size of your tote bag
-Choose the right fabric
-Cut out the fabric pieces
– Sew the fabric together
– Attach the straps
– Finish the project

Make sure you measure your tote bag before sewing

If you’re like most people, you probably don’t sew much. But that doesn’t mean you can’t sew a tote bag! In this tutorial, we’ll show you how to sew a tote bag with lining using a simple and straightforward technique.

Before getting started, make sure you measure your tote bag. This will help ensure the finished bag fits perfectly. You’ll also want to make sure the lining is the right size and shape for your tote bag. We recommend using an existing piece of fabric as your lining.

To begin, cut the lining fabric exactly to your desired size. Next, iron the fabric pieces together so they are secure. Then, start sewing around the perimeter of the fabric with a straight stitch. Make sure to backstitch at both ends of the seam so it’s very strong.

Now it’s time for the fun part- filling your tote bag! You can use any type of filler material you’d like- from seeds to scraps of fabric. Just be sure to evenly distribute the filler throughout the entire area of your lining. Once everything is filled and smoothed out, finish sewing up the sides of your tote bag and voilà! You now have a very realistic-looking tote bag.

How to sew a lining for a tote bag

If you’re like me, your current tote bag is battered and well-loved, but it’s time for an update. This tutorial will show you how to sew a lining for a tote bag, adding a little bit of luxury and organization to your everyday carry. You’ll need:

-1 yard of fabric
-A zipper or a hemming tape measure
-Thread
-A sewing machine with a zipper foot
-Pins
-Step 1: Cut the fabric according to the measurements you took from the zipper or hemming tape measure. Make sure the measurements are accurate—you’ll need this fabric to fit snugly around the interior of your tote bag.

Step 2: Iron the fabric flat. Pin the lining inside out so that it fits snuggly against the inside of your tote bag. You may also want to top stitch around the perimeter of the lining.

Step 3: Sew around the edge of the lining, using a zigzag stitch if desired. Leave a small opening at one end so that you can fit your hand inside the bag when it’s empty.

How To Make Your Bag Last A Lifetime

If you’re anything like me, your tote bag collection is constantly growing. But with all those totes, how do you know they’ll last a lifetime? Here’s how to sew a tote bag with lining that will outlast the rest! How To Sew 5-Dollar Fabric To An 8-Dollar Bag. A lot of people are afraid to use up all those scraps of fabric, but that’s okay! This is a great way to use up your scraps and really make the bag or quilt look full.

How To Sew A Tote Bag With Reinforced Shoulder Strap. I have a tendency to overstuff my totes, so this is a good trick for anyone who wants to stop doing that!

How To Make Your Own Lined Tote Bag. If you need a lined bag but don’t want to spend money on one, this is the way to go! You can actually make a ton of these for not very much

Conclusion

Sewing a tote bag with lining is a great way to add some extra protection and style to your bag. By sewing the lining into the seams of the bag, you can ensure that your tote will hold up better over time and that it will look nicer than a plain tote. This tutorial will show you how to sew a basic tote bag with lining, so start looking for materials and get started on your next project! I am so glad you enjoyed this tutorial! This is a great way to use up any scraps of fabric that you have lying around. I hope that these tutorials help you as much as they have helped me and I appreciate your feedback. If there is anything else you would like me to blog about, please let me know in the comments below! Thanks again for reading and happy sewing!

Total
0
Shares
Leave a Reply

Your email address will not be published.

Previous Post
How To Sew A Kimono

How To Sew A Kimono

Next Post
How To Sew A Halter Top

How To Sew A Halter Top

Related Posts